GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2002 🢒 Isuzu T-Series (Truck Line C) 🢒 Brakes 🢒 Park Brake 🢒 Parking Brake Pressure Sensor Replacement

Removal Procedure
  1. Apply the parking brake.
  2. Position a drain pan in order to catch the fluid that will leak out.

    3. Do not reuse the old fluid.


    Object Number: 29092 Size: SH
  3. Remove the pressure sensor electrical connector.
  4. Remove the pressure sensor.

Installation Procedure

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the pressure sensor.

    2. Tighten
    Tighten the pressure sensor to 12 N·m (106 lb in).


    Object Number: 29092 Size: SH
  2. Install the pressure sensor electrical connector.