GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2002 🢒 Isuzu T-Series (Truck Line C) 🢒 Brakes 🢒 Disc Brakes 🢒 Front Disc Brake Pads Replacement

Front Disc Brake Pads Replacement Bendix Rail Slider

Removal Procedure

Caution: Avoid taking the following actions when you service wheel brake parts:

   • Do not grind brake linings.
   • Do not sand brake linings.
   • Do not clean wheel brake parts with a dry brush or with compressed air.
Some models or aftermarket brake parts may contain asbestos fibers which can become airborne in dust. Breathing dust with asbestos fibers may cause serious bodily harm. Use a water-dampened cloth in order to remove any dust on brake parts. Equipment is available commercially in order to perform this washing function. These wet methods prevent fibers from becoming airborne.

Notice: Support the brake caliper with heavy mechanic wire, or equivalent, whenever it is separated from its mount and the hydraulic flexible brake hose is still connected. Failure to support the caliper in this manner will cause the flexible brake hose to bear the weight of the caliper, which may cause damage to the brake hose and in turn may cause a brake fluid leak.


    Object Number: 209267 Size: SH
  1. Remove and support the brake caliper (5). Refer to Front Brake Caliper Replacement .

    2. Do not disconnect the flexible brake hose from the caliper.

  2. Remove the inboard brake pad from the brake caliper mounting plate.
  3. Remove the inboard brake pad.

    4. Object Number: 22104 Size: SH
  4. Slide the outboard brake pad along the rail in the brake caliper housing to the notches.
  5. Remove the outboard brake pad.

Installation Procedure

    Object Number: 22104 Size: SH
  1. Install the outboard brake pad through the notches and slide along the rail in the brake caliper housing.
  2. Install the inner brake pad onto the brake caliper mounting plate.
  3. Install the brake caliper. Refer to Front Brake Caliper Replacement .

Front Disc Brake Pads Replacement Dayton-Walther Rail Slider

Removal Procedure

    Object Number: 209264 Size: SH
  1. Remove the brake caliper (5). Refer to Front Brake Caliper Replacement .

    2. Object Number: 22102 Size: SH
  2. Remove the brake pad retainer Z spring.

    3. Object Number: 200256 Size: SH
  3. Slide the outboard brake pad along the rail in the brake caliper housing to the notches.
  4. Remove the outboard brake pad.
  5. Slide the inboard brake pad along the rail in the brake caliper housing to the notches.
  6. Remove the inboard brake pad.

Installation Procedure

    Object Number: 200256 Size: SH
  1. Install the inboard brake pad through the notches and slide along the rail until seated to the caliper pistons.
  2. Install the outboard brake pad through the notches and slide along the rail until seated against the caliper housing.

    3. Object Number: 735660 Size: SH
  3. Install the brake pad retainer Z spring to the brake caliper.

    4. Object Number: 209264 Size: SH
  4. Install the brake caliper (5). Refer to Front Brake Caliper Replacement .