GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 641686  Size: SH
  1. Clean the area around the drain and fill plugs.
  2. Remove the oil fill plug from the transmission case.
  3. Position a container under the oil drain hole to catch the transmission oil.
  4. Remove the oil drain plug from the transmission case.

Installation Procedure


    Object Number: 641686  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the oil drain plug to the transmission case.
  2. Tighten
    Tighten the transmission oil drain plug to 69 N·m (51 lb ft).

  3. Fill the transmission to the level of the oil fill plug hole with transmission oil. Refer to Lubrication Specifications .
  4. Install the fill plug to the transmission case.
  5. Tighten
    Tighten the transmission oil fill plug to 69 N·m (51 lb ft).