4.1. | The nut (2) |
4.2. | The washer |
4.3. | The cardan bolt (3) |
ā¢ | The left side cowl half screws |
ā¢ | The right side cowl half screws |
ā¢ | The left side cowl half (12) |
ā¢ | The right side cowl half (5) |
11.1. | The combination switch screws |
11.2. | The combination switch (4) |
13.1. | The ignition switch screws |
13.2. | The ignition switch (6) |
ā¢ | The wiring harness screw |
ā¢ | The clamp |
ā¢ | Upper steering shaft assembly mounting bolts (2) |
ā¢ | Upper steering shaft assembly (1) |
ā¢ | Upper steering shaft assembly (1) |
ā¢ | Upper steering shaft assembly mounting bolts (2) |
ā¢ | The wiring harness clamp |
ā¢ | The screws |
ā¢ | Left side cowl half (12) |
ā¢ | Right side cowl half (5) |
ā¢ | Secure the cowl halves with screws |
Notice: Refer to Fastener Notice in the Preface section.
ā¢ | The lower cardan joint bolt (3) |
ā¢ | The lower cardan joint washer |
ā¢ | The lower cardan joint nut (2) |
Tighten
Tighten to 55 NĀ·m (41 lb ft).