GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2002 🢒 Isuzu T-Series (Truck Line C) 🢒 Body and Accessories 🢒 Doors 🢒 Door Striker Replacement

Removal Procedure

    Object Number: 214738 Size: SH
  1. Clean the dirt from the area and mark the position of the striker on the door pillar with a grease pencil.
  2. Remove the striker bolts.
  3. Remove the striker from the door pillar.

Installation Procedure

    Object Number: 214738 Size: SH
  1. Position the striker on the marks and install the striker to the door pillar.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the striker bolts.

    3. Tighten
    Tighten the bolts to 18 N·m (11 lb ft).