GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2002 🢒 Isuzu T-Series (Truck Line C) 🢒 Body and Accessories 🢒 Doors 🢒 Door Inside Handle Replacement

Removal Procedure

    Object Number: 214735 Size: SH
  1. Remove the screw from the handle.
  2. Remove the handle.
  3. Disconnect the lock rods from the handle.
  4. Remove the inner door handle.

Installation Procedure

    Object Number: 214735 Size: SH
  1. Install the inner door handle.
  2. Connect the lock rods to the handle.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the inner door handle screw to the handle.

    4. Tighten
    Tighten the screw to 3 N·m (27 lb in).