Tools Required

J 9886-01 Regulator Handle Tool

1. Insert the J 9886-01 between the handle and the bearing plate.
2. Align the J 9886-01 parallel with the handle. Push in the J 9886-01 in order to disengage the clip.
3. Pull the handle from the door.
4. Remove the bearing plate.

1. Install the bearing plate to the trim panel.



2. Position the window regulator handle on the door without the clip.
3. Raise the window to the full up position.
4. Push the clip onto the handle.
5. Insert the handle onto the regulator shaft. Ensure that the handle is horizontal with the knob pointing toward the front of the door.
6. Install the handle by pressing the unit into place until the clip engages the window regulator shaft.