GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2002 🢒 Isuzu T-Series (Truck Line C) 🢒 Body and Accessories 🢒 Doors 🢒 Window Channel Replacement

Removal Procedure
  1. Remove the trim panel. Refer to Door Trim Panel Replacement .
  2. Remove the water deflector.

    3. Object Number: 214703 Size: SH
  3. Remove the bolts from the run channels on the door.

Installation Procedure

    Object Number: 214703 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the run channels to the door with the bolts.

    2. Tighten
    Tighten the bolts to 9 N·m (79 lb in).

  2. Install the water deflector with the bolts.

    3. Tighten
    Tighten the bolts to 9 N·m (79 lb in).

  3. Install the trim panel. Refer to Door Trim Panel Replacement .