Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Headlights/Daytime Running Lights (DRL) Schematics | |||
1 | Did you review the headlamps operation and perform the necessary inspections? | Go to Step 2 | |
2 | Place the multifunction lever in the flash to pass position. Do the high beam headlamps illuminate? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 | Do the high beam headlamps operate properly? | Go to Step 4 | Go to Headlamps Inoperative - High Beams in Symptoms |
4 | Replace the multifunction switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column. Did you complete the replacement? | Go to Step 5 | -- |
5 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
