Removal Procedure
- Remove the instrument
panel (IP) bezel. Refer to
Instrument Cluster Replacement
in Instrument Panel, Gages, and Console.
- Remove the screw that
holds the switch panel.
- Remove the electrical connector from the switch.
- Push the tabs on the end of the switch and remove the switch from
the panel.
Installation Procedure
- Push the switch into the
bezel until the switch tabs lock into place.
- Connect the electrical connector from the switch.
- Install the screw that holds the switch panel.
- Install the instrument
panel (IP) bezel. Refer to
Instrument Cluster Replacement
in Instrument Panel, Gages, and Console.