Important: Removal of the fourth clutch backing plate retainer ring, the fourth
clutch backing plate, and the fourth clutch plates will ease assembly of the
overrun clutch housing assembly.
- Remove the fourth clutch backing plate retainer ring (523).
- Remove the fourth clutch backing plate (524).
- Remove the clutch plates (525, 526).
- Install the fourth clutch
housing (529) into the transmission case.
- Install a new fourth clutch
housing bolt (26).
- Rotate the transmission to the horizontal position.
Important: Do not over torque the fourth clutch housing bolt (26).
- Tighten the fourth clutch housing bolt (26).
Tighten
Tighten the bolt to 23-26 N·m (17-19 lb ft).
Refer to Fastener Notice
.