For 1990-2009 cars only
- Remove the transmission fluid pressure manual valve position switch (TFP manual valve position switch) bolts (76) and the TFP manual valve position switch (40).
- Remove the control valve body assembly bolts (35).
- Remove the manual shift shaft detent spring assembly (41).
- Remove the control valve body assembly bolt (35) and the lube oil pipe retainer (37).
- Remove the lube oil pipe (39).
- Remove the control valve assembly (44) including the following:
- Remove the manual valve (319) from the control valve assembly to prevent damage.
- Inspect the manual valve (319) for nicks and burrs.
- Remove the control valve body spacer plate gasket (48) from the case. The gasket may stick to the spacer plate.
- Remove the TCC solenoid valve screen assembly (75) from the case passages.
- Inspect the TCC solenoid valve screen assembly (75) for debris and damage.
- Remove the 8 control valve body ball check valves (54).
| • | The 3rd and 4th clutch accumulator housing (51) |
| • | The control valve body gasket (45) (not shown) |
| • | The control valve body spacer plate (46) (not shown) |
| • | The accumulator housing gasket (47) (not shown) |
Important: The TCC solenoid valve screen assembly can be removed easily by applying light pressure at the bottom of the screen.
Notice: Do not use a magnet in order to remove the control valve body ball check valves. This may magnetize the control valve body ball check valves, causing metal particles to stick to them.
- Remove the transmission fluid pressure manual valve position switch (TFP manual valve position switch) bolts (76) and the TFP manual valve position switch (40).
- Remove the control valve body assembly bolts (35).
- Remove the manual shift shaft detent spring assembly (41).
- Remove the control valve body assembly bolt (35) and the lube oil pipe retainer (37).
- Remove the lube oil pipe (39).
- Remove the control valve assembly (44) including the following:
- Remove the manual valve (319) from the control valve assembly to prevent damage.
- Inspect the manual valve (319) for nicks and burrs.
- Remove the control valve body spacer plate gasket (48) from the case. The gasket may stick to the spacer plate.
- Remove the TCC solenoid valve screen assembly (75) from the case passages.
- Inspect the TCC solenoid valve screen assembly (75) for debris and damage.
- Remove the 8 control valve body ball check valves (54).
| • | The 3rd and 4th clutch accumulator housing (51) |
| • | The control valve body gasket (45) (not shown) |
| • | The control valve body spacer plate (46) (not shown) |
| • | The accumulator housing gasket (47) (not shown) |
Important: The TCC solenoid valve screen assembly can be removed easily by applying light pressure at the bottom of the screen.
Notice: Do not use a magnet in order to remove the control valve body ball check valves. This may magnetize the control valve body ball check valves, causing metal particles to stick to them.
