For 1990-2009 cars only
Tools Required
| • | J 21363 Intermediate Clutch Inner Seal Protector |
| • | J 23327 Clutch Spring Compressor |
| • | J 36850 Transjel® Lubricant |
| • | J 38734 Intermediate Spring Compressor Adapter |
- Install the oil cooler pipe fitting seal (690) into the center support assembly (640).
- Lubricate the new inner (637) and outer (638) intermediate clutch piston seals, and the seal pockets in the intermediate clutch piston (636) with DEXRON®VI transmission fluid.
- Install the inner (637) and outer (638) intermediate clutch piston seals onto the intermediate clutch piston (636) with the seal lips facing away from the spring pockets.
- Using the J 21363 , install the intermediate clutch piston (636) onto the center support assembly (640) . Use a fine feeler gauge blade to assist with installing the piston outer seal.
- Remove the J 21363 .
- Install the intermediate clutch spring assembly (635). Align the springs with the pockets in the intermediate clutch piston.
- Using the J 38734 and the J 23327 , install the intermediate clutch spring retainer ring (634).
- Remove the J 38734 and the J 23327 .
- Install the new direct clutch housing oil seal rings (639) onto the center support assembly (640).
- Use J 36850 or equivalent in order to keep the oil seal rings in place.
Notice: Do not overexpand the oil seal rings. Damage to the rings may result.
Tools Required
| • | J 21363 Intermediate Clutch Inner Seal Protector |
| • | J 23327 Clutch Spring Compressor |
| • | J 38734 Intermediate Spring Compressor Adapter |
| • | J 36850 Assembly Lubricant |
- Install the oil cooler pipe fitting seal (690) into the center support assembly (640).
- Lubricate the new inner (637) and outer (638) intermediate clutch piston seals, and the seal pockets in the intermediate clutch piston (636) with DEXRON® III transmission fluid.
- Install the inner (637) and outer (638) intermediate clutch piston seals onto the intermediate clutch piston (636) with the seal lips facing away from the spring pockets.
- Using the J 21363 , install the intermediate clutch piston (636) onto the center support assembly (640) . Use a fine feeler gauge blade to assist with installing the piston outer seal.
- Remove the J 21363 .
- Install the intermediate clutch spring assembly (635). Align the springs with the pockets in the intermediate clutch piston.
- Using the J 38734 and the J 23327 , install the intermediate clutch spring retainer ring (634).
- Remove the J 38734 and the J 23327 .
- Install the new direct clutch housing oil seal rings (639) onto the center support assembly (640).
- Use J 36850 or equivalent in order to keep the oil seal rings in place.
Notice: Do not overexpand the oil seal rings. Damage to the rings may result.
