Removal Procedure
Warning: Refer to Battery Disconnect Warning in the Preface section.
- Disconnect the negative battery cable.
- Clean all the fuel pipe and hose connections and the surrounding areas before disconnecting in order to avoid possible contamination of the fuel system.
- Remove the fuel filler cap.
- Drain the fuel below the level of the fuel tank fill hose.
- Raise the vehicle.
- Loosen the fuel fill hose clamps (2, 3).
- Remove the fuel fill hose (6).
- Cap the open end of the fuel tank.
Installation Procedure
- Uncap the fuel tank.
Caution: Refer to Fastener Caution in the Preface section.
- Install the fuel fill hose (6).
Tighten
Tighten the fuel fill hose clamps (2, 3) to 2.75 N·m (24 lb in).
- Lower the vehicle.
- Refill the fuel tank.
- Install the fuel filler cap.
- Connect the negative battery cable.