GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 2009 🢒 Isuzu - N Series 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Manifold Absolute Pressure Sensor Replacement

Removal Procedure
  1. Remove the engine cover.
  2. Disconnect the manifold absolute pressure (MAP) sensor electrical connector.

    3. Object Number: 260159 Size: SH
  3. Remove the MAP sensor (1) from the intake manifold.

Installation Procedure

Important: Lightly coat the MAP sensor seal with clean engine oil before installing the sensor.

  1. Install the MAP sensor to the upper intake manifold.

    2. Object Number: 260159 Size: SH
  2. Connect the MAP sensor electrical connector.
  3. Install the engine cover.