For 1990-2009 cars only
- Disconnect the wire harness connectors from the electrical components.
- Remove the transmission wiring harness assembly (34) from the wiring harness clamps (33).
- Remove the transmission wiring harness assembly (34) from the case. Use a 1-5/16 inch 12-point socket in order to release the pass-through connector retaining clips from the case.
- Remove the pass-thru connector O-ring seal (36) and replace.
Caution: If the transmission wiring harness assembly does not need servicing, do not remove the assembly from the case. Excessive force may damage the pass-through connector.
