Engine Flywheel Replacement Automatic

1. Remove the transmission. Refer to Transmission Replacement in Automatic Transmission.



2. Remove the flywheel. Refer to Engine Flywheel Removal .

1. Install the flywheel. Refer to Engine Flywheel Installation .

Tighten
Tighten the flywheel bolts to 100 N·m (74 lb ft).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the transmission. Refer to Transmission Replacement in Automatic Transmission.

Engine Flywheel Replacement Manual

1. Remove the clutch assembly. Refer to Clutch Assembly Replacement in Clutch.
2. Remove the flywheel. Refer to Engine Flywheel Removal .

1. Install the flywheel. Refer to Engine Flywheel Installation .
2. Install the clutch assembly. Refer to Clutch Assembly Replacement in Clutch.