Removal Procedure
Important:
ā¢ | Ensure that the shift lever is positioned into the mechanical
3rd or 4th gear prior to removal of the shift housing from the transmission.
The transmission must remain in this state when the shift housing is removed. |
ā¢ | Do not disassemble the transmission shift housing. Internal parts
for this shift housing are not available. Opening the shift housing voids
the warranty. |
ā¢ | When removing the shift housing from the transmission, use the
exposed bolts on the base of the housing. Do not use the bolts under the rubber
boot located at the top of the housing. |
- Remove four bolts securing the shift housing to the transmission.
- Remove the insulator from the transmission case.
Installation Procedure
- Install the insulator to the transmission case.
- Install four bolts securing the shift housing to the transmission.
Tighten
Tighten the shift housing bolts to 12 NĀ·m
(106 lb in).
- After tightening the four bolts securing the shift housing to the transmission,
the shifter can be engaged into other shift positions.