Driver Seat Buckle and Passenger Seat Buckles

1. Disconnect the driver-side seat belt buckle electrical connector.



2. Remove the bolt that retains the driver-side seat belt buckle or buckles to the vehicle.
3. Remove the driver-side seat belt buckle or buckles from the vehicle.



4. Remove the bolt that retains the passenger-side seat belt buckle or buckle and belt assembly to the vehicle.
5. Remove the passenger-side seat belt buckle or buckle and belt assembly from the vehicle.

1. Install the passenger-side seat belt buckle or buckle and belt assembly to the vehicle.
2. Install the bolt that retains the passenger-side seat belt buckle or buckle and belt assembly to the vehicle.

Tighten
Tighten the seat belt buckle or buckle and belt assembly bolt to 70 N·m (52 lb ft).

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.




3. Install the driver-side seat belt buckle or buckles to the vehicle.
4. Install the bolt that retains the driver-side seat belt buckle or buckles to the vehicle.

Tighten
Tighten the seat belt buckle or buckles bolt to 70 N·m (52 lb ft).




5. Connect the driver-side seat belt buckle electrical connector.