For 1990-2009 cars only
- Connect the yellow 2-way connector at the base of the steering column.
- Install the Connector Position Assurance (CPA) to the yellow 2-way connector.
- Install LH Knee bolster. Refer to Knee Bolsters in Interior Trim Section 10A4.
- Install LH I/P sound insulator. Refer to Instrument Panel Replacement in Interior Trim Section 10A4.
- Install the AIR BAG fuse to the fuse block.
- Staying well away from the supplemental restraint steering wheel inflator module turn the ignition switch to the RUN position.
- Perform the SRS Diagnostic System Check if the AIR BAG warning lamp does not operate as described.
| 6.1. | The AIR BAG warning lamp will flash seven times. |
| 6.2. | The AIR BAG warning lamp will then turn OFF. |
