For 1990-2009 cars only
Component Specifications Rear Wheel
System | Caliper Housing Bore | Rotor | ||
|---|---|---|---|---|
RPO Code | Diameter | Diameter (nominal) | Rotor (On-Vehicle) Lateral Runout | Axle Shaft Flange Lateral Runout |
JC1 | 48 mm (1.88 in) | 295 mm (11.614 in) | 0.10 mm (0.004 in) | 0.05 mm (0.002 in) |
Component Specifications Rotor Thickness, Front Wheel
System | Original | Thickness Variation | Minimum Thickness After Refinishing | Discard |
|---|---|---|---|---|
JM3 | 26.2 mm (1.03 in) | 0.010 mm (0.0003 in) | 24.89 mm (0.980 in) | 24.51 mm (0.965 in) |
JC1 | 29 mm (1.14 in) | 0.010 mm (0.0003 in) | 28.8 mm (1.13 in) | 27.5 mm (1.08 in) |
Component Specifications Rotor Thickness, Rear Wheel
System | Original | Thickness Variation | Minimum Thickness After Refinishing | Discard |
|---|---|---|---|---|
JC1 | 20.00 mm (0.787 in) | 0.013 mm (0.0005 in) | 19.64 mm (0.735 in) | 18.50 mm (0.728 in) |
