GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Isuzu 🢒 1999 🢒 S/T Isuzu - 2WD 🢒 Transmission/Transaxle 🢒 Automatic Transmission - 4L60-E 🢒 Input Carrier Inspection and Installation

    Object Number: 5463 Size: SH
  1. Inspect the input carrier captive thrust bearing assembly. To check the captive thrust bearing in the input carrier (662) for wear, place a bushing or an output shaft sleeve (690) onto the bearing race and turn it with the palm of your hand. Do not touch the pinion gears. Any imperfections will be felt through the bushing.

    2. Object Number: 190468 Size: SH
  2. Install the input carrier assembly (662) onto the output shaft.

    3. Object Number: 13271 Size: SH

    Important: 

       • Do not reuse the old output shaft to input carrier retainer (661).
       • Do not over expand the new output shaft to input carrier retainer during installation.

  3. Install a new output shaft to input carrier retainer (661).

    4. Object Number: 190469 Size: SH
  4. Remove the J 29837-A .

    Object Number: 5463 Size: SH
  1. Inspect the input carrier captive thrust bearing assembly. To check the captive thrust bearing in the input carrier (662) for wear, place a bushing or an output shaft sleeve (690) onto the bearing race and turn it with the palm of your hand. Do not touch the pinion gears. Any imperfections will be felt through the bushing.

    2. Object Number: 190468 Size: SH
  2. Install the input carrier assembly (662) onto the output shaft.

    3. Object Number: 13271 Size: SH

    Important: 

       • Do not reuse the old output shaft to input carrier retainer (661).
       • Do not over expand the new output shaft to input carrier retainer during installation.

  3. Install a new output shaft to input carrier retainer (661).

    4. Object Number: 588767 Size: SH
  4. Remove the J 29837-A .