Name | Location | Locator View | Connector End View |
|---|---|---|---|
Body Relay Block | LH of the dash, right of the IP Fuse Block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Body Control Module (BCM) Connector C1, Brown(24 Cavities) | At the lower rear of the IP, on the heater | Body Control System Component Views in Body Control System | Body Control System Connector End Views in Body Control System |
Body Control Module (BCM) Connector C2, Blue (24 Cavities) | At the lower rear of the IP, on the heater | Body Control System Component Views in Body Control System | Body Control System Connector End Views in Body Control System |
Data Link Connector (DLC) | To the lower left of the IP | ||
Electronic Brake Control Module (EBCM) | Part of the Brake Pressure Modulator Valve (BPMV), at the left rear wheelwell | Antilock Brake System Component Views in Antilock Brakes | Antilock Brake System Connector End Views in Antilock Brakes |
Electronic Brake Control Module (EBCM) Connector C1 (10 Cavities) | The body harness connector on the LH of the EBCM | Antilock Brake System Component Views in Antilock Brakes | Antilock Brake System Connector End Views in Antilock Brakes |
Instrument Cluster | In the IP, ahead of the steering column | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges and Console | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges and Console |
IP Fuse Block | LH of the IP, near the door jamb switch, LF | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Powertrain Control Module (PCM) Connector C1 (2.2L Engine) | On the right of the engine compartment | Engine Controls Component Views in Engine Controls - 2.2L | Powertrain Control Module Connector End Views in Engine Controls - 2.2L |
Supplemental Restraint SystemSensing And Diagnostic Module (SDM) | Between the left and the right seats, below the carpeting | SRS Component Views in SRS | SRS Connector End Views in SRS |
Transfer Case Shift Control Module Connector C1 | Behind the RH Front kick panel, the lower connector | Transfer Case Control Component Views in Transfer Case | Transfer Case Control Connector End Views in Transfer Case |
Transfer Case Shift Control Module Connector C2 | Behind the RH Front kick panel, the upper connector | Transfer Case Control Component Views in Transfer Case | Transfer Case Control Connector End Views in Transfer Case |
Underhood Fuse Block | On top of the left inner wheelwell | Power and Grounding Component Views in Wiring Systems | -- |
Underhood Fuse Block Connector C1 (68 Cavities) (Body) | Below the Underhood Fuse Block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Underhood Fuse Block Connector C2 (68 Cavities) (Engine) | Below the Underhood Fuse Block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Vehicle Control Module (VCM) (4.3L Engine) | RH of the engine compartment | Engine Controls Component Views in Engine Controls - 4.3L | -- |
Vehicle Control Module (VCM) (4.3L Engine) Connector C4 (24 Cavities) | RH of the engine compartment | Engine Controls Component Views in Engine Controls - 4.3L | VCM Connector End Views in Engine Controls - 4.3L |
C101 (10 Cavities) (2.2L Engine) | Engine harness to body harness, to the right of the engine compartment, near the PCM | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C101 (10 Cavities) (4.3L Engine) | Engine harness body harness, to the right of the engine compartment, near the VCM | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C203 (116 Cavities) | Body harness to IP harness, to the RH of the IP | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G103 (2.2L Engine) | (CKT 351) Engine harness, RH Front of the engine block, under the generator | Harness Routing Views in Wiring Systems | -- |
G103 (4.3L Engine) | (CKT 351) Engine harness, RH Rear of the cylinder head | Harness Routing Views in Wiring Systems | -- |
G105 (2.2L Engine) | (CKT Engine harness, to the RH Rear of the engine block, near the ignition control module | Harness Routing Views in Wiring Systems | -- |
G105 (4.3L Engine) | (CKT 450, 451) Engine harness, to the LH Rear of cylinder head | Harness Routing Views in Wiring Systems | -- |
G200 | (CKT 1850) Body harness, on the LH Front of the IP, above P100 | Harness Routing Views in Wiring Systems | -- |
G201 | (CKT 1850) Body harness, on the LH Front of the IP, above P100 | Harness Routing Views in Wiring Systems | -- |
P100 | IP bulkhead pass-through,LH Rear of the engine compartment, on the cowl | Harness Routing Views in Wiring Systems | -- |
S106 (2.2L Engine) | (CKT 351) Engine harness, between the breakouts to the PCM and to the fuel injector connector, 25 cm (9.84 in) from the breakouts to the PCM | Harness Routing Views in Wiring Systems | -- |
S106 (4.3L Engine) | (CKT 351) Engine harness, between the breakouts to the rear heated oxygen sensors connector and the body harness connector, 7 cm (2.76 in) from the breakout to the heated oxygen sensor connector | Harness Routing Views in Wiring Systems | -- |
S152 (2.2L Engine) | (CKT 351, CKT 413, CKT 451) Engine harness, between the breakouts for the fuel injector connector and the Ignition Control Module, 7cm (2.76 in) from G105 | Harness Routing Views in Wiring Systems | -- |
Splice Pack SP201 | Body harness, to the left of the IP, below the IP Fuse Block, taped to the Body Harness | Harness Routing Views in Wiring Systems | -- |
Splice Pack SP202 | (CKT 379, CKT 1850) Strapped to the body harness, at the left center of the IP | Harness Routing Views in Wiring Systems | -- |
