Did you perform the DRL System Check?

--

Go to Step 2

Go to Daytime Running Lights (DRL) System Check

Use the scan tool in order to read the Body Control Module (BCM) current trouble codes.

Does the scan tool show any DTCs?

--

Go to Diagnostic System Check - Body Control System in Body Control System

Go to Step 3

1. Disconnect the headlamp, LH low beam connector.
2. Move the headlamp switch to the HEAD position.
3. Move the multifunction switch to the LOW BEAM position.
4. Connect a test lamp from the headlamp, LH low beam connector terminal A to ground.

Does the test lamp illuminate?

--

Go to Step 5

Go to Step 4

Locate and repair the open in CKT 712 (YEL) between the headlamp, LH low beam connector and the underhood fuse block.

Is the repair complete?

--

Go to Daytime Running Lights (DRL) System Check

--

Connect a test lamp from the headlamp, LH low beam connector terminal A to terminal B.

Does the test lamp illuminate?

--

Go to Step 7

Go to Step 6

Locate and repair an open in CKT 525 (YEL) between the headlamp, LH low beam connector and the underhood fuse block.

Is the repair complete?

--

Go to Daytime Running Lights (DRL) System Check

--

Replace the headlamp, LH low beam bulb.

Is the repair complete?

--

Go to Daytime Running Lights (DRL) System Check

--