For 1990-2009 cars only
Removal Procedure
Caution: Halogen bulbs contain gas under pressure. Handling a bulb improperly
could cause it to shatter into flying glass fragments. To help avoid personal
injury:
• Turn off the lamp switch and allow the bulb to cool before changing
the bulb. • Leave the lamp switch OFF until the bulb change is complete. • Always wear eye protection when changing a halogen bulb. • Handle the bulb only by its base. Avoid touching the glass. • Keep dirt and moisture off the bulb. • Properly dispose of the used bulb. • Keep halogen bulbs out of the reach of children.
- Turn the red locking tab upward to the UNLOCK position, as noted on the rear of the headlamp.
- Pull forward on the headlamp in order to release the headlamp from the upper retainer.
- Pull up on the headlamp in order to release the headlamp from the lower retainers.
- Remove the bulb from the headlamp. Push in and rotate the bulb ¼ turn counter-clockwise.
Installation Procedure
- Install the bulb to the headlamp. Push in and rotate the bulb ¼ turn clockwise.
- Install the headlamp to the lower retainers. Ensure that the headlamp harness does not get pinched.
- Push the headlamp rearward in order to install the headlamp to the upper retainer.
- Push the red locking tab downward to the LOCK position as noted on the rear of the headlamp.
