Radio Rear Speaker Replacement for Isuzu S/T Isuzu - 2WD 2000

1. Remove the rear body side trim panel. Refer to the appropriate procedure Body Side Trim Panel Replacement in Interior Trim.



2. Disconnect the electrical connectors, as necessary.
3. Remove the radio rear speaker nuts.
4. Remove the rear speaker from the rear body side trim panel.

1. Install the radio rear speaker to the rear body side trim panel.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2. Install the radio rear speaker nuts.

Tighten
Tighten the radio rear speaker nuts to 1.2 N·m (11 lb in).

3. Connect the electrical connectors, as necessary.
4. Install the rear body side trim panel. Refer to the appropriate procedure Body Side Trim Panel Replacement in Interior Trim.
5. Inspect for proper circuit operation.