Engine Controls - 2.2L (L43) for Isuzu S/T Isuzu - 2WD 2001

All Description and Operation

• Powertrain Control Module Description
• Service Programming System (SPS) Description

All Special Tools and Equipment

• Special Tools

Cleaning, Inspection, and Adjustment

• Spark Plug Wire Inspection

Diagnostic Procedures

• Backfire
• Cuts Out, Misses
• Detonation/Spark Knock
• Diagnostic Starting Point - Engine Controls
• Diagnostic System Check - Engine Controls
• Dieseling, Run-On
• Engine Cranks But Does Not Run
• Hard Start
• Hesitation, Sag, Stumble
• Inspection/Maintenance (I/M) Catalyst System Set Procedure
• Inspection/Maintenance (I/M) Complete System Set Procedure
• Inspection/Maintenance (I/M) System Check
• Inspection/Maintenance (I/M) System DTC Table
• Inspection/Maintenance Evaporative Emission System Set
• Inspection/Maintenance Heated Oxygen Sensor Heater System Set
• Inspection/Maintenance Heated Oxygen Sensor/Oxygen Sensor System Set
• Inspection/Maintenance Secondary Air Injection System Set
• Lack of Power, Sluggishness, or Sponginess
• Poor Fuel Economy
• Poor Fuel Fill Quality
• Rough, Unstable, or Incorrect Idle and Stalling
• Surges/Chuggles
• Symptoms - Engine Controls

Diagnostic Trouble Codes

• Diagnostic Trouble Code (DTC) List
• DTC P0601, P0602, P0603, P0604, P0605, P0606, P0607, P1600, P1621, P1627, P1680, P1681, P1683, or P2610

Electrical/Electronic Specifications

• Diagnostic Trouble Code (DTC) Type Definitions
• Diagnostic Trouble Code (DTC) Types
• Ignition System Specifications
• Temperature Versus Resistance

General Diagnostic Information

• Export Application Components Table
• Scan Tool Data Definitions
• Scan Tool Data List

Mechanical Specifications

• Fastener Tightening Specifications

Other Specifications

• Fuel System Specifications
• GM SPO Group Numbers

Removal, Installation, and Replacement

• Powertrain Control Module Programming
• Powertrain Control Module Replacement