Name | Location | Locator View | Connector End View |
|---|---|---|---|
A/C Compressor Clutch | Part of the A/C compressor | HVAC Component Views in HVAC Systems with A/C - Manual | HVAC Connector End Views in HVAC Systems with A/C Manual |
A/C Compressor Clutch Diode (2.2L Engine) | In the engine harness, 20 cm (7.87 in) from the A/C compressor clutch connector | HVAC Component Views in HVAC Systems with A/C - Manual | -- |
A/C Compressor Clutch Relay | In the underhood fuse block | Power and Grounding Component Views in Wiring Systems | -- |
A/C Refrigerant Pressure Sensor (2.2L Engine) | On the A/C evaporator tube | HVAC Component Views in HVAC Systems with A/C - Manual | HVAC Connector End Views in HVAC Systems with A/C - Manual |
Body Relay Block | LH of the dash, right of the IP fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Body Control Module (BCM) Connector C1, Brown(24 Cavities) | At the lower rear of the IP, on the heater | Body Control System Component Views in Body Control System | Body Control System Connector End Views in Body Control System |
Body Control Module (BCM) Connector C2, Blue (24 Cavities) | At the lower rear of the IP, on the heater | Body Control System Component Views in Body Control System | Body Control System Connector End Views in Body Control System |
Camshaft Position (CMP) Sensor (2.2L Engine) | To the right of the engine, forward of the coil packs | ||
Crankshaft Position (CKP) Sensor (2.2L Engine) | To the right of the engine, below the coil packs | ||
Cruise Control Module (CCM) | At the left rear of the engine compartment, on the cowl | Cruise Control Component Views in Cruise Control | Cruise Control Connector End Views in Cruise Control |
Data Link Connector (DLC) | To the lower left of the IP | Data Link Communications Component Views in Wiring Systems | Data Link Communications Connector End Views in Wiring Systems |
Electronic Brake Control Module (EBCM) | Part of the brake pressure modulator valve (BPMV), at the left rear wheelwell | Antilock Brake System Component Views in Antilock Brakes | Antilock Brake System Connector End Views in Antilock Brakes |
Electronic Brake Control Module (EBCM) Connector C1 (10 Cavities) | The body harness connector on the LH of the EBCM | Antilock Brake System Component Views in Antilock Brakes | Antilock Brake System Connector End Views in Antilock Brakes |
Engine Coolant Temperature (ECT) Sensor (2.2L Engine) | At the front of the engine, in the coolant piping | ||
Evaporative (EVAP) Emission Canister Purge Valve (2.2L Engine) | RH side of engine above the coil packs | ||
Evaporative (EVAP) Emission Canister Vent Valve | Crossmember area of the fuel tank, rear center of the crossmember behind the fuel tank | ||
Fuel Injectors #1-4 (2.2L Engine) | On the lower manifold assembly | -- | |
Fuel Pump and Sender | Internal to the fuel tank | ||
Fuel Pump Relay | In the underhood fuse block | Power and Grounding Component Views in Wiring Systems | -- |
Fuel Tank Pressure Sensor | The three wire connector at the top of the fuel tank | ||
Heated Oxygen Sensor (HO2S) Bank 1, Sensor 1 (2.2L Engine) | In the exhaust pipe, to the rear of the catalytic converter | ||
Heater and A/C Controller (w/ Man A/C) Connector C2 (3 Cavities) (Heater Control Lamp) | Next to the vacuum harness connector | HVAC Component Views in HVAC Systems with A/C - Manual | HVAC Connector End Views in HVAC Systems with A/C - Manual |
Idle Air Control (IAC) Valve (2.2L Engine) | Top of the engine, on the throttle body | ||
Ignition Control Module (ICM) (2.2L Engine) Connector C1 (2 Cavities) | RH rear of the engine, near the grounding strap | ||
Ignition Control Module (ICM) (2.2L Engine) Connector C2 (6 Cavities) | RH rear of the engine, near the grounding strap | ||
Instrument Cluster | In the IP, ahead of the steering column | Instrument Panel, Gages, and Console Component Views in Instrument Panel, Gauges and Console | Instrument Panel, Gages, and Console Connector End Views in Instrument Panel, Gauges and Console |
Intake Air Temperature (IAT) Sensor (2.2L Engine) | LF of the engine compartment, in the air intake duct | ||
IP Fuse Block | LH of the IP, near the door jamb switch, LF | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Knock Sensor (KS) (2.2L Engine) | Lower RH of the engine, below the coil packs | ||
Manifold Absolute Pressure (MAP) Sensor (2.2L Engine) | Top RH of the engine, on the intake manifold | ||
Oxygen Sensor, Bank 1 Sensor 1 (2.2L Engine) | LH side of the engine, in the exhaust manifold crossover pipe | ||
Powertrain Control Module (PCM) Connector C1 (2.2L Engine) | On the right of the engine compartment | ||
Powertrain Control Module (PCM) Connector C2 (2.2L Engine) | On the right of the engine compartment | ||
Radio Connector C2, (10 Cavities) | Center of IP | Entertainment Component Views in Entertainment | Entertainment Connector End Views in Entertainment |
Throttle Position (TP) Sensor (2.2L Engine) | Top of the engine, forward of the throttle body | ||
Underhood Fuse Block | On top of the left inner wheelwell | Power and Grounding Component Views in Wiring Systems | -- |
Underhood Fuse Block Connector C1 (68 Cavities) (Body) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Underhood Fuse Block Connector C2 (68 Cavities) (Engine) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Underhood Fuse Block Connector C3 (32 Cavities) (Chassis) | Below the underhood fuse block | Power and Grounding Component Views in Wiring Systems | Power and Grounding Connector End Views in Wiring Systems |
Vehicle Speed Sensor (VSS) (2.2L Engine w/ M/T) | LH Rear of the M/T | ||
C101 (10 Cavities) (2.2L Engine) | Engine harness to body harness, to the right of the engine compartment, near the PCM | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C104 (6 Cavities) (2.2L Engine) | Chassis to engine harness, LH of the transmission | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C111 (5 Cavities) (2.2L Engine) | Rear of the engine, at the fuel rail | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
C203 (116 Cavities) | Body harness to IP harness, to the RH of the IP | Harness Routing Views in Wiring Systems | Inline Harness Connector End Views in Wiring Systems |
G102 (2.2L Engine) | On the engine harness, RH front of the engine block, under the generator | Harness Routing Views in Wiring Systems | -- |
G103 (2.2L Engine) | (CKT 351) Engine harness, RH front of the engine block, under the generator | Harness Routing Views in Wiring Systems | -- |
G105 (2.2L Engine) | (CKT Engine harness, to the RH rear of the engine block, near the ignition control module | Harness Routing Views in Wiring Systems | -- |
G200 | (CKT 1850) Body harness, on the LH front of the IP, above P 100 | Harness Routing Views in Wiring Systems | -- |
G201 | (CKT 1850) Body harness, on the LH front of the IP, above P 100 | Harness Routing Views in Wiring Systems | -- |
G402 | (CKT 1750) Chassis harness, near the top center of the second crossmember from rear, with the fuel filler neck ground strap | Harness Routing Views in Wiring Systems | -- |
P100 | IP bulkhead pass-through,LH rear of the engine compartment, on the cowl | Harness Routing Views in Wiring Systems | -- |
S103 (w/ A/C) | (CKT 350) Engine harness, on the anode side of the A/C compressor clutch diode, in the breakout to the A/C compressor and cutoff switch | Harness Routing Views in Wiring Systems | -- |
S104 (w/ A/C) | (CKT 59) At the engine harness, on the cathode side of the A/C compressor clutch diode, in the breakout to the A/C compressor and cutoff switch | Harness Routing Views in Wiring Systems | -- |
S106 (2.2L Engine) | (CKT 351) Engine harness, between the breakouts to the PCM and to the fuel injector connector, 25 cm (9.84 in) from the breakouts to the PCM | Harness Routing Views in Wiring Systems | -- |
S128 (2.2L Engine) | (CKT 120) Injector harness between the breakout to Injectors #3 and #4 | Harness Routing Views in Wiring Systems | -- |
S140 (w/ M/T) | (CKT 450) Engine harness, on the engine harness breakout to the M/T VSS, 7 cm (2.7 in) from the breakout | Harness Routing Views in Wiring Systems | -- |
S152 (2.2L Engine) | (CKT 351, CKT 413, CKT 451) Engine harness, between the breakouts for the fuel injector connector and the ignition control module, 7cm (2.75 in) from G105 | Harness Routing Views in Wiring Systems | -- |
Splice Pack SP200 | (CKT 41, CKT 241, CKT 341, CKT 817) Strapped to the body harness, in the center front of the IP, to the right of SP 204 | Harness Routing Views in Wiring Systems | -- |
Splice Pack SP201 | Body harness, to the left of the IP, below the IP fuse block, taped to the body harness | Harness Routing Views in Wiring Systems | -- |
Splice Pack SP202 | (CKT 379, CKT 1850) Strapped to the body harness, at the left center of the IP | Harness Routing Views in Wiring Systems | -- |
Splice Pack SP422 (2.2L Engine) | (CKT 510) Chassis harness, on the LH frame rail, behind the crossmember at the transmission | Harness Routing Views in Wiring Systems | -- |
