GM Service Manual Online
For 1990-2009 cars only

    Object Number: 3795  Size: SH
  1. Apply a 5 mm (0.193 in) diameter bead of sealer to the oil pan side sealing flanges.

  2. Object Number: 3796  Size: SH
  3. Apply sealer to the oil pan surface that contacts the engine front cover.

  4. Object Number: 3797  Size: SH
  5. Install a new oil pan rear seal. Apply a small amount of sealer to the oil pan rear seal ears.

  6. Object Number: 3793  Size: SH
  7. Install the oil pan.

  8. Object Number: 3792  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  9. Install the oil pan nuts.
  10. Tighten
    Tighten the oil pan nuts to 10 N·m (89 lb in).


    Object Number: 3791  Size: SH
  11. Install the oil pan bolts.
  12. Tighten
    Tighten the oil pan bolts to 10 N·m (89 lb in).