Evaporative Emission Vent Valve Replacement 4-Door Utility and Pickup

Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

1. Disconnect the negative battery cable.



2. Raise the vehicle.
3. Remove the spare tire.



4. Disconnect the vent solenoid electrical connector.



5. Disconnect the vacuum hose.



6. Bend back the tang on the bracket.



7. Remove the vent solenoid.

1. Slide the vent solenoid onto the bracket.



2. Connect the vacuum hose



3. Install the electrical connector.
4. Lower the vehicle.
5. Connect the negative battery cable.