Did you perform the Power Windows System Check?

--

Go to Step 2

Go to Power Windows System Check

1. Access the left door lock and side window switch.
2. Turn the ignition switch to the RUN position.
3. Connect a J 39200 digital multimeter (DMM) to ground and CKT 1001 (DK GRN), terminal L at the left door lock and side window switch connector C1.
4. Ensure that the connector C1 remains connected.
5. Test for voltage.

Is ignition voltage present?

IGN+

Go to Step 4

Go to Step 3

Repair the open or high resistance in CKT 1001 (DK GRN) between the power window circuit breaker and the left door lock and side window switch.

Is the repair complete?

--

Go to Power Windows System Check

--

1. Turn the ignition switch to the RUN position.
2. Connect a J 39200 DMM to CKT 1001 (DK GRN), terminal L at the left door lock and side window switch connector C1 and CKT 1850 (BLK), terminal C at the left door lock and side window switch connector C2.
3. Test for voltage.

Is ignition voltage present?

IGN+

Go to Step 6

Go to Step 5

Repair the open or high resistance in CKT 1850 (BLK) between the left door lock and side window switch connector C2 and G202.

Is the repair complete?

--

Go to Power Windows System Check

--

Replace the left door and side window switch.

Is the repair complete?

--

Go to Power Windows System Check

--