Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the power door locks system check? | -- | Go to Step 2 | |
2 |
Are there any current DTCs? | -- | Go to Body Control Module (BCM) Diagnostic System Code | Go to Step 3 |
3 |
Does the test lamp light? | -- | Go to Step 5 | Go to Step 4 |
4 | Repair an open in CKT 840. Is the repair complete? | -- | -- | |
5 | Connect a fused jumper between CKT 840 terminal D and then back and forth between CKT 194 (WHT) terminal E and CKT (LT BLU) terminal C at the right door lock and side window switch connector. Do the doors lock and unlock? | -- | Go to Step 6 | Go to Step 5 |
6 | Replace the right door lock and side window switch. Is the repair complete? | -- | -- | |
7 |
Does the scan tool display UNLOCK? | -- | Go to Step 8 | Go to Step 9 |
8 |
Does the passenger door unlock? | -- | -- | |
9 | Repair the open in CKT 194 (WHT). Is the repair complete? | -- | Go to Step 6 | Go to Step 10 |
10 | Replace the door unlock relay? Is the repair complete? | -- | -- | |
11 |
Does the test lamp light? | -- | Go to Step 12 | Go to Step 13 |
12 |
Does the test lamp light? | -- | Go to Step 14 | Go to Step 15 |
13 | Repair the open in CKT 294 to CKT 294 (TAN) terminal B. Is the repair complete? | -- | -- | |
14 | Replace the right door lock actuator. Is the repair complete? | -- | -- | |
15 | Repair the open in CKT 295 (GRY). Is the repair complete? | -- | -- |
