Turn Signal Cancel Cam and Bearing Thrust Washer - Disassemble - Off Vehicle Column Shift

Tools Required

J 23653-SIR Lock Plate Compressor

Important: Let the SRS coil assembly hang freely after removal.

1. Remove the SRS coil assembly. Refer to Steering Column Accident Damage Inspection - Off Vehicle .



2. Compress the shaft lock shield assembly (2) using J 23653-SIR .
3. Remove the bearing retainer (1) from the steering shaft assembly.
4. Discard the bearing retainer (1).
5. Remove J 23653-SIR from the steering shaft assembly.



6. Remove the following parts from the steering shaft assembly:

•	The shaft lock shield assembly (4)

•	The turn signal cancel cam assembly (3)

•	The upper bearing spring (2)

•	The thrust washer (1)

Turn Signal Cancel Cam and Bearing Thrust Washer - Disassemble - Off Vehicle Floor Shift

Tools Required

J 23653-SIR Lock Plate Compressor

Important: Let the SRS coil assembly hang freely after removal.

1. Remove the SRS coil assembly. Refer to Inflatable Restraint Steering Wheel Module Coil Disassemble - Off Vehicle .



2. Compress the shaft lock shield assembly (2) using J 23653-SIR .
3. Remove the bearing retainer (1) from the steering shaft assembly.
4. Discard the bearing retainer (1).
5. Remove J 23653-SIR from the steering shaft assembly.



6. Remove the following parts from the steering shaft assembly:

•	The shaft lock shield assembly (4)

•	The turn signal cancel cam assembly (3)

•	The upper bearing spring (2)

•	The thrust washer (1)