Removal Procedure
Caution: This vehicle is equipped with a Supplemental Restraint System (SRS).
Failure to follow the correct procedure could cause the following conditions:
• | Unnecessary SRS system repairs |
In order to avoid the above conditions, observe the following guidelines:
• | Refer to SRS Component Views in order to determine if you are
performing service on or near the SRS components or the SRS wiring. |
• | If you are performing service on or near the SRS components or
the SRS wiring, disable the SRS system. Refer to Disabling the SRS System
in SRS. |
- Disable the SRS system. Refer
to
Disabling the SRS
in SRS.
- Remove the steering column trim covers. Refer to
Steering Column Trim Cover Replacement - On Vehicle
.
- Put the shift lever clevis into the neutral position.
- Use a small screwdriver in order to pry the automatic transmission
shift lock control actuator away from the steering column jacket assembly
and the cable shift cam assembly.
- Remove the automatic transmission shift lock control actuator.
Installation Procedure
- Firmly install the automatic transmission
shift lock control actuator onto the steering column jacket assembly and
the cable shift cam assembly.
- Adjust the automatic transmission shift
lock control actuator (with the shift lever clevis in the neutral position).
Use the following steps:
2.1. | Pull out the tab (1) on the adjuster block side (2)
of the automatic transmission shift lock control actuator. |
2.2. | Press on the adjuster block (2) in order to compress the
internal adjuster spring which disengages the adjuster teeth. Slide the adjuster
block (2) as far away from the actuator as possible. |
2.3. | Lock the adjuster block (2) in place by pushing in on the
tab (1). |
- Inspect the automatic transmission shift lock control actuator
for the following items:
3.1. | The automatic transmission shift lock control actuator must lock
the shift lever clevis when the shift lever clevis is put into the park position. |
3.2. | Depress the brake pedel in order to move the shift lever out of
the park position. |
3.3. | The actuator will be energized. |
3.4. | Readjust the automatic transmission shift lock control actuator
if needed. |
- Install the steering column trim covers. Refer to
Steering Column Trim Cover Replacement - On Vehicle
.
- Enable the SRS system. Refer to
Enabling the SRS
in SRS.