Fasten Safety Belt Chime Always On. Isuzu S/T Isuzu

For 1990-2009 cars only

Makes 🢒 Isuzu 🢒 2000 🢒 S/T Isuzu - 4WD 🢒 Body and Accessories 🢒 Instrument Panel, Gauges, and Console 🢒 Fasten Safety Belt Chime Always On

Step	Action	Value(s)	Yes	No
1	Did you perform the Body Control Module Diagnostic System Check?	--	Go to Step 2	Go to Diagnostic System Check - Body Control System in Body Control System
2	Did you review the audible warnings system operation and perform the necessary inspections?	--	Go to Step 3	Go to Symptoms - Audible Warnings
3	Verify that the fasten safety belt chime is always on. Is the chime operating properly?	--	Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems	Go to Step 4
4	Disconnect the seat belt switch connector. Does the seat belt alarm stop sounding?	--	Go to Step 5	Go to Step 6
5	Replace the seat belt switch. Refer to Front Seat Belt Buckle Replacement in Seat Belts. Is the repair complete?	--	Go to Step 7	--
6	Locate and repair the short to ground in CKT 238 (BLK/WHT) between the seat belt switch and the BCM. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. If there is no short to ground, replace the BCM. Refer to Body Control Module Replacement in Body Control System. Is the repair complete?	--	Go to Step 7	--
7	Operate the system in order to verify the repair. Did you correct the condition?	--	System OK	Go to Step 4