RELEASE SOLENOID BOLTS MAY CONTACT TRUNK SILL PLATE-PROC.

SUBJECT: RELEASE SOLENOID ATTACHMENT BOLTS MAY CONTACT REAR TRUNK SILL PLATE (REPLACE HEAD SCREW)

VEHICLES AFFECTED: 1992 OLDSMOBILE ACHIEVA "N" MODEL

Condition:

--------- Release solenoid attachment bolts may contact rear trunk sill plate.

Correction:

---------- 1. Remove existing hex head screw P/N 11504317.

2. Replace with torx head screw P/N 11515144.

For vehicles repaired under warranty use: .2 hours

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.