| Models: | 1996 Buick Century, Regal, Skylark |
| 1996 Chevrolet Beretta, Corsica, Lumina, Monte Carlo |
| 1996 Oldsmobile , Achieva, Cutlass Ciera, Cutlass Supreme |
| 1996 Pontiac Grand Am, Grand Prix |
| with 3.1L Engine (VIN M -- RPO L82) |
This bulletin is being issued to revise Step 7 of DTC P0341 in
the Engine Controls sub-section of the Service Manual. Please replace the
current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using
a paper version of this Service Manual, please make a reference to this bulletin
on the affected page.
Step 7 should read as follows: With a fused jumper connected to the
sensor feed terminal, connect a DVM between the CMP sensor ground and engine
ground. Does the DVM display a voltage near the specified value?
