For 1990-2009 cars only
- Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
- Turn the ignition switch to the LOCK position.
- Remove the key from the ignition switch.
- Remove the AIR BAG Fuse from the fuse block.
- Remove the Connector Position Assurance (CPA) from the driver yellow 2-way connector (1) located near the base of the steering column.
- Disconnect the driver yellow 2-way connector (1) located at the base of the steering column.
- Remove the I/P sound insulator (RH). Refer to Instrument Panel Insulator Replacement in Instrument Panel, Gauges and Console.
- Remove the Connector Position Assurance (CPA) (2) from the passenger yellow 2-way connector (3) located under the RH I/P.
- Disconnect the passenger yellow 2-way connector (1) located under the RH I/P.
Important: With the AIR BAG Fuse removed and the ignition switch in the RUN position, the AIR BAG warning lamp illuminates. This is a normal operation and does not indicate an SIR system malfunction.
