Did you perform the Audible Warnings System Check?

--

Go to Step 2

Go to Diagnostic System Check - Audible Warnings

1. Disconnect the multi-function alarm module connector.
2. Connect a test lamp between connector C2 terminals D and E.

Did the test light illuminate?

--

Go to Step 4

Go to Step 3

Connect a test lamp between connector C2 terminal D and ground.

Did the test light illuminate?

--

Go to Step 6

Go to Step 5

Replace the multi-function alarm module. Refer to Multifunction Alarm Module Replacement.

Did you complete the repair?

--

Go to Diagnostic System Check - Audible Warnings

--

1. Inspect for a poor connection at connector C2 terminal D.
2. Inspect for an open in CKT 340.

Did you find and repair a condition?

--

Go to Diagnostic System Check - Audible Warnings

--

1. Inspect for a poor connection at connector C2 terminal E.
2. Inspect for an open in CKT 150.

Did you find and correct a condition?

--

Go to Diagnostic System Check - Audible Warnings

--