Exhaust Manifold Installation Right Side

1. Install the exhaust manifold gasket.
2. Install the exhaust manifold.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the exhaust manifold nuts.

Tighten
Tighten the exhaust manifold nuts to 16 N·m (12 lb ft).

4. Install the right side spark plugs.

Tighten
Tighten the spark plugs to 27 N·m (20 lb ft).




5. Install the exhaust manifold lower heat shield.
6. Install the exhaust manifold upper heat shield.
7. Install the exhaust manifold heat shield bolts.

Tighten
Tighten the exhaust manifold heat shield bolts to 10 N·m (89 lb in).




8. Coat the threads of the heated oxygen sensor with anti-seize compound GM P/N 5613695, or the equivalent.
9. Install the heated oxygen sensor.

Tighten
Tighten the heated oxygen sensor to 42 N·m (31 lb ft).

Exhaust Manifold Installation Left Side

1. Install the exhaust manifold gasket.
2. Install the exhaust manifold.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the exhaust manifold nuts.

Tighten
Tighten the exhaust manifold nuts to 16 N·m (12 lb ft).

4. Install the left side spark plugs.

Tighten
Tighten the spark plugs to 27 N·m (20 lb ft).




5. Install the exhaust manifold heat shield.
6. Install the exhaust manifold heat shield bolts.

Tighten
Tighten the exhaust manifold heat shield bolts to 10 N·m (89 lb in).