GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2000 🢒 Alero 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Stop Lamp Switch Replacement

Removal Procedure

    Object Number: 385275 Size: SH
  1. Remove the driver side instrument panel insulator.
  2. Disconnect the electrical connection (1) from the stoplamp switch.
  3. Remove the stoplamp switch retainer (2). Grasp and turn the retainer 90 degrees counter-clockwise and pull the retainer towards the rear of the vehicle.

    4. Object Number: 385279 Size: SH
  4. Remove stop lamp switch (1).

Installation Procedure

    Object Number: 385279 Size: SH
  1. Insert the stoplamp switch (1) into the retainer until the switch body seats on the retainer.
  2. Pull the brake pedal upward against the internal pedal stop.
  3. Turn the switch 90 degrees clockwise in order to lock the switch into position.
  4. Adjust the stoplamp switch. Refer to Stop Lamp Switch Adjustment .

    5. Object Number: 385275 Size: SH
  5. Connect the electrical connection (1) to the stoplamp switch.
  6. Install the driver side instrument panel insulator.