Step | Action | Value(s) | Yes | No | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Did you perform the Hydraulic Brake Diagnostic System Check? | -- | ||||||||||||||
2 | Inspect the front suspension for loose or missing components. Did you find any loose or missing components? | -- | ||||||||||||||
3 | Tighten, repair or replace missing the components as necessary. Refer to Fastener Tightening Specifications in Front Suspension. Did you complete the repair? | - | -- | |||||||||||||
4 | Inspect the disc brake pads and brake shoe linings for the following conditions:
Did you find a condition? | -- | ||||||||||||||
5 | Replace the brake linings. Refer to the following procedures:
Did you complete the repair? | -- | -- | |||||||||||||
6 | Inspect the wheel assemblies for out of balance condition. Are any of the wheel assemblies out of balance? | -- | ||||||||||||||
7 | Balance the wheel assembly. Refer to Tire and Wheel Balancing in Vibration Diagnosis and Correction. Did you complete the repair? | -- | -- | |||||||||||||
8 | Verify proper brake system operation. Does the original condition still exist? | -- | System OK |
