GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

    Caution: Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component. Disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal. Failure to follow these precautions may result in personal injury and/or damage to the vehicle or its components.

  1. Disconnect the negative battery cable.

  2. Object Number: 104490  Size: SH
  3. Remove the automatic transmission control lever handle.
  4. Remove the console. Refer to Front Floor Console Cup Holder Replacement in Instrument Panel, Gauges and Console.

  5. Object Number: 418831  Size: SH
  6. Remove the range select lever cable from the automatic transmission shift control.
  7. Remove the electrical connector.

  8. Object Number: 104495  Size: SH
  9. Remove the automatic transmission control bolts.
  10. Remove the automatic transmission shift control.

Installation Procedure


    Object Number: 104495  Size: SH
  1. Install the automatic transmission shift control.
  2. Install the automatic transmission shift control bolts.
  3. Install the electrical connector.

  4. Object Number: 418831  Size: SH
  5. Install the range select lever cable to the automatic transmission control.
  6. Install the console. Refer to Front Floor Console Cup Holder Replacement in Instrument Panel, Gauges and Console.

  7. Object Number: 104490  Size: SH
  8. Install the automatic transmission control lever handle.
  9. Connect the negative battery cable.