The power steering pump is a vane-type pump which provides hydraulic pressure for the system. The power steering system consists of the following components:
• | The driveshaft |
• | The pump housing |
• | The pump ring |
• | The pressure plate |
• | The thrust plate |
• | The flow control valve |
• | The rotor |
• | The vanes |
The opening at the rear of the pump housing contains the following components:
• | The pump ring |
• | The pressure plate |
• | The thrust plate |
• | The rotor |
• | The vanes |
• | The end plate |
The small opening on the side of the housing contains the following components:
• | The pressure line fitting |
• | The flow control valve |
• | The spring |
The flow control orifice is a component of the pressure line fitting. A pressure relief valve inside the flow control valve limits the pump pressure.