GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Oldsmobile 🢒 2000 🢒 Alero 🢒 Restraints 🢒 SIR 🢒 Enabling the SIR System

    Object Number: 241290 Size: SH
  1. Connect the passenger yellow 2-way connector (3) located above the RH I/P wiring harness junction block.
  2. Install the connector position assurance (CPA (2) to the passenger yellow 2-way connector (3).
  3. Install the RH I/P wiring harness junction block access panel.

    4. Object Number: 241289 Size: SH
  4. Connect the driver yellow 2-way connector (1) located above the LH I/P wiring harness junction block.
  5. Install the connector position assurance (CPA) (2) to the driver yellow 2-way connector (1).
  6. Install the AIR BAG Fuse to the LH I/P wiring harness junction block.
  7. Install the LH I/P wiring harness junction block access panel.
  8. Staying well away from both air bags, turn ON the ignition.
    9. 8.1. The AIR BAG warning lamp will flash seven times.
    8.2. The AIR BAG warning lamp will then turn OFF.
  9. Perform A Diagnostic System Check - SIR if the AIR BAG warning lamp does not operate as described.