Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Lighting Systems Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Did you find and correct the condition? | -- | System OK | Go to Step 3 |
3 | With the transmission gear selector in park, test the back-up lamp feed circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | System OK | Go to Step 4 |
4 |
Did you find a short to ground? | -- | Go to Step 5 | |
5 | Replace the park neutral position switch Refer to LINK in Automatic Transaxle-4T40-E/4T45-E Did you complete the replacement? | -- | System OK | -- |
6 |
Did you find and correct the condition? | -- | System OK | Go to Step 7 |
7 | With the transmission gear selector in park, test the back-up lamp feed circuit for a high resistance or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | System OK | Go to Step 8 |
8 |
Did the voltage measure to specified value? | B+ | Go to Step 9 | Go to Step 5 |
9 | Test the ground circuit on each back-up bulb for an open. Refer to Circuit Testing in Wiring Systems. Did you find and correct the condition? | -- | System OK |
