Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Lighting Systems Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Does the test lamp light? | -- | Go to Step 3 | Go to Step 4 |
3 | Use a test lamp in order to backprobe the right (right lamps inoperative) or the left (left lamps inoperative) IP wiring harness junction block connector C1 between terminal E4 (left turn signal lamps) or terminal F2 (right turn signal lamps) and ground. Does the test lamp light? | -- | Go to Step 5 | Go to Step 6 |
4 | Replace the turn/headlamp switch assembly. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column-Standard. Is the repair complete? | -- | System OK | -- |
5 | Replace the right (right lamps inoperative) or the left (left lamps inoperative) IP wiring harness junction block. Is the repair complete? | -- | System OK | -- |
6 | Repair the open in the Turn Signal Lamp Feed circuit between the IP wiring harness junction block and the turn/headlamp switch assembly. Refer to Wiring Repairs in Wiring Systems. Is the repair complete? | -- | System OK | -- |
