Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check Performed? | -- | Go to Step 2 | |
2 |
Is the test light on? | -- | Go to Step 4 | Go to Step 3 |
3 |
Is the repair complete? | -- | -- | |
4 |
Is the test light on? | -- | Go to Step 8 | Go to Step 5 |
5 | Check for a poor connection condition at the wiper/washer switch terminals C and A. Is a poor connection condition present? | -- | Go to Step 6 | Go to Step 7 |
6 | Repair the poor connection condition at the wiper/washer switch terminals C and A. Is the repair complete? | -- | -- | |
7 | Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement in Steering. Is the replacement complete? | -- | -- | |
8 |
Is the test light on? | -- | Go to Step 10 | Go to Step 9 |
9 | Repair the open circuit condition in CKT 92 between the wiper/washer switch and the wiper motor. Is the repair complete? | -- | -- | |
10 | Connect a test light from wiper motor connector terminal C to terminal A. Is the test light on? | -- | Go to Step 12 | Go to Step 11 |
11 | Repair the open circuit condition or the poor connection condition to ground in CKT 150. Is the repair complete? | -- | -- | |
12 | Check for a poor connection condition to the wiper motor. Is a poor connection condition present? | -- | Go to Step 13 | Go to Step 14 |
13 | Repair the poor connection condition to the wiper motor. Is the repair complete? | -- | -- | |
14 | Replace the wiper motor. Refer to Windshield Wiper Motor Replacement Is the replacement complete? | -- | -- |
