Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | Go to Step 2 | |
2 |
Does the wiper motor park? | -- | Go to Step 3 | Go to Step 4 |
3 | Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement in Steering. Is the replacement complete? | -- | -- | |
4 | Measure the voltage from the wiper/washer switch connector (vehicle side) terminal E to ground using a DMM. Is the measurement less than 1.0 V (approx. 0 V)? | 1.0 V | Go to Step 5 | Go to Step 9 |
5 | Measure the voltage from the wiper/washer switch connector (vehicle side) terminal D to ground using a DMM. Is the measurement less than 1.0 V (approx. 0 V)? | 1.0 V | Go to Step 6 | Go to Step 12 |
6 |
Is battery voltage present? | 10.5-15 V | Go to Step 7 | Go to Step 8 |
7 | Repair the short circuit condition to battery in CKT 92. Is the repair complete? | -- | -- | |
8 | Replace the wiper motor cover. Refer to Wiper Motor Cover Replacement Is the replacement complete? | -- | -- | |
9 |
Is the measurement less than 1.0 V (approx. 0 V)? | 1.0 V | Go to Step 10 | Go to Step 11 |
10 | Replace the wiper motor cover. Refer to Wiper Motor Cover Replacement Is the replacement complete? | -- | -- | |
11 | Repair the battery voltage connection to CKT 113. Is the repair complete? | -- | -- | |
12 |
Is the measurement less than 1.0 V (approx. 0 V)? | 1.0 V | Go to Step 13 | Go to Step 14 |
13 | Replace the wiper motor cover. Refer to Wiper Motor Cover Replacement Is the replacement complete? | -- | -- | |
14 | Repair the battery voltage connection to CKT 112. Is the repair complete? | -- | -- |
