Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you review the Radio/Audio System Operation? | -- | Go to Step 2 | |
2 |
Does the speaker operate properly? | -- | Go to Step 3 | |
3 | Is the vehicle equipped with an amplifier? | -- | Go to Step 4 | Go to Step 5 |
4 | Is only one rear speaker inoperative? | -- | Go to Step 6 | Go to Step 7 |
5 |
Does the speaker emit an audible pop? | -- | Go to Step 8 | Go to Step 9 |
6 |
Does the speaker emit an audible pop? | -- | Go to Step 14 | Go to Step 15 |
7 |
Did you find and correct the condition? | -- | Go to Step 13 | -- |
8 | Inspect for poor connections at the harness connector of the radio. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 13 | Go to Step 10 |
9 | Test the circuits of the inoperative speaker for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 13 | Go to Step 11 |
10 | Replace the radio. Did you complete the replacement? | -- | Go to Step 13 | -- |
11 | Inspect for poor connections at the speaker. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 13 | Go to Step 12 |
12 | Replace the speaker. Refer to Radio Front Side Door Lower Speaker Replacement or Front Upper Speaker Replacement or Radio Rear Speaker Replacement for service procedure. Did you complete the replacement? | -- | Go to Step 13 | -- |
13 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | -- |
14 | Inspect for poor connections at the harness connector (C2) of the radio. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 13 | Go to Step 10 |
15 | Test the circuits of the inoperative speaker for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 13 | Go to Step 11 |
